CONTRIBUTION
SEEKING
OTHER
#186
Idea
Prototype
Market
Scaling
Car That Runs On Air
VALUATION
Valuation Restricted
Car That Runs On Air
CONTRIBUTION
SEEKING
DISTRIBUTION PARTNER
#102
Idea
Prototype
Market
Scaling
Wooden Mechanical Inspired Crafts
VALUATION
Valuation Restricted
Wooden Mechanical Inspired Crafts for Interior
CONTRIBUTION
SEEKING
DISTRIBUTION PARTNER
#164
Idea
Prototype
Market
Scaling
TOP 10 Simple Automatic Gate Latch Lock Ideas.
VALUATION
Valuation Restricted
Friends. In this video you will see 10 simple gate lock mechanisms. You can easily make each of t...
Friends. In this video you will see 10 simple gate lock mechanisms. You can easily make each of them using a minimal set of tools.
READ MORE
OPEN REEL
SPONSORED INNOVATION
Aman got INR 15.5 Lakhs Funding
Learn More
CONTRIBUTION
SEEKING
DISTRIBUTION PARTNER
#104
Idea
Prototype
Market
Scaling
15 MINUTE RC WING Build | 250g
VALUATION
Valuation Restricted
Light and small DIY trainer Wing that can be built in about 15 Minutes. I know that the leading a...
Light and small DIY trainer Wing that can be built in about 15 Minutes. I know that the leading and trailing edges are flat but I just wanted to prove, that its not necessary.
READ MORE
OPEN REEL
CONTRIBUTION
SEEKING
DISTRIBUTION PARTNER
#166
Idea
Prototype
Market
Scaling
The simplest two-way automatic door latch.
VALUATION
Valuation Restricted
The simplest two-way automatic door latch.
This is a short video showing how to make an ex... The simplest two-way automatic door latch.
This is a short video showing how to make an extremely simple two-way automatic door latch.
This is a short video showing how to make an ex... The simplest two-way automatic door latch.
This is a short video showing how to make an extremely simple two-way automatic door latch.
READ MORE
OPEN REEL
SEEKING
MANUFACTURER
#142
Idea
Prototype
Market
Scaling
DIY 5 Speed Gearbox from Cardboard
VALUATION
Valuation Restricted
Amazing 5 speed gearbox DIY. In this video I will guide you gearbox build with 5 speed transmissi...
Amazing 5 speed gearbox DIY. In this video I will guide you gearbox build with 5 speed transmission from cardboard. This is a manual transmissio - RC 5 speed. Principle of operation of 5-speed gearbox:
Mode N: the gears of the middle axis \"are not attached to\" the gears of axis 3 (the inner axis, is attached to the motor), so the middle axis and the 1- axis axis in the outermost are not turned.
Mode 1: First gear (R = 3cm) (from left) of axis 3 \"attached to\" third gear (R = 3cm) of the middle axis and first gear (R = 2cm) of the middle axis \"attached\" to the first gear (R = 4cm) of the first axis (outermost axis) so that the reel rotates (the slowest speed).
Mode 2: Second gear (R = 3cm) of axis 1 \"attached to\" third gear (R = 3cm) of the middle axis and second gear (R = 2.5cm) of the middle axis \" attach to the \"second gear (R = 3.5cm) of the first axis (outermost axis) the rotating axis (faster speed than mode 1).
Mode 3: Third gear (R = 3cm) of axis 1 + third gear (R = 3cm) of the middle axis + third gear (R = 3cm) of the first axis (outer axis) \"attach to each other\" rotation axis (faster speed than Mode 2 and equal to the speed of motor).
Mode 4: Fourth gear (R = 3.5cm) of axis 1 \"attached to\" fourth gear (R = 2.5cm) of the middle axis and third gear (R = 3cm) of the middle axis \"attached to\" the fourth gear (R = 3cm) of the first axis (outer axis) the rotating axis (faster speed than mode 3).
Mode 5: Fifth gear (R = 4cm) of axis 1 \"attached to\" fifth gear (R = 2cm) of the middle axis and third gear (R = 3cm) of the middle axis \"mounted into the \"fifth gear (R = 3cm) of the first axis (outermost axis) the rotating axis (fastest speed)
it active amazing. Hope you like speed gearbox it. Thank you!
Materials you need: cardboard, 4 bearings, A4 paper, 1 motor DC 9v, 1 switch, battery, aluminum bars, hot glue gun and follow all steps from this video and you will get amazing #speedgearbox with #5speedtransmission. If you like this video don't forget to subscribe :). Thank you!
Mode N: the gears of the middle axis \"are not attached to\" the gears of axis 3 (the inner axis, is attached to the motor), so the middle axis and the 1- axis axis in the outermost are not turned.
Mode 1: First gear (R = 3cm) (from left) of axis 3 \"attached to\" third gear (R = 3cm) of the middle axis and first gear (R = 2cm) of the middle axis \"attached\" to the first gear (R = 4cm) of the first axis (outermost axis) so that the reel rotates (the slowest speed).
Mode 2: Second gear (R = 3cm) of axis 1 \"attached to\" third gear (R = 3cm) of the middle axis and second gear (R = 2.5cm) of the middle axis \" attach to the \"second gear (R = 3.5cm) of the first axis (outermost axis) the rotating axis (faster speed than mode 1).
Mode 3: Third gear (R = 3cm) of axis 1 + third gear (R = 3cm) of the middle axis + third gear (R = 3cm) of the first axis (outer axis) \"attach to each other\" rotation axis (faster speed than Mode 2 and equal to the speed of motor).
Mode 4: Fourth gear (R = 3.5cm) of axis 1 \"attached to\" fourth gear (R = 2.5cm) of the middle axis and third gear (R = 3cm) of the middle axis \"attached to\" the fourth gear (R = 3cm) of the first axis (outer axis) the rotating axis (faster speed than mode 3).
Mode 5: Fifth gear (R = 4cm) of axis 1 \"attached to\" fifth gear (R = 2cm) of the middle axis and third gear (R = 3cm) of the middle axis \"mounted into the \"fifth gear (R = 3cm) of the first axis (outermost axis) the rotating axis (fastest speed)
it active amazing. Hope you like speed gearbox it. Thank you!
Materials you need: cardboard, 4 bearings, A4 paper, 1 motor DC 9v, 1 switch, battery, aluminum bars, hot glue gun and follow all steps from this video and you will get amazing #speedgearbox with #5speedtransmission. If you like this video don't forget to subscribe :). Thank you!
READ MORE
OPEN REEL
SPONSORED INNOVATION
Recruitment Software - Applicant Tracking System
Learn More
CONTRIBUTION
SEEKING
MANUFACTURER
#101
Idea
Prototype
Market
Scaling
Kinetic art object, Perpetual motion machine Idea, Marble Machine
VALUATION
Valuation Restricted
Kinetic art object, Perpetual motion machine Idea, Marble Machine
CONTRIBUTION
SEEKING
OTHER
#162
Idea
Prototype
Market
Scaling
How to make Used Oil Mini Camping Stove Burner Version 2
VALUATION
Valuation Restricted
How to make Used Oil Mini Camping Stove Burner Version 2
CONTRIBUTION
SEEKING
OTHER
#185
Idea
Prototype
Market
Scaling
Wireless tech: a game-changer for electric vehicle charging in China
VALUATION
Valuation Restricted
Wireless charging technology is showing potential to revolutionize the electric vehicle (EV) indu...
Wireless charging technology is showing potential to revolutionize the electric vehicle (EV) industry in China, promising to make EV usage more convenient and appealing for drivers. At a wireless charging station in pilot operation in Nanjing City, motorists are freed from the hassle of manually plugging their EVs into an electricity source using a physical cable. As they wait sitting in the driver's seat for the vehicle to charge up, an in-car app keeps them up to date with the process. Via wireless charging pads embedded into the ground, the cars can also discharge electricity to the grid for usage during peak demand hours. Elsewhere, a model with the wireless charging function has already entered commercial mass production. According to its designers, charging automatically begins once the vehicles pull in at the charging site.
READ MORE
OPEN REEL
SPONSORED INNOVATION
Freelancing opportunities @ Anyworks.in
Learn More
SEEKING
DISTRIBUTION PARTNER
#158
Idea
Prototype
Market
Scaling
DIY Petrol and Electric Hybrid Bike at Home
VALUATION
Valuation Restricted
Hi friends today I am going to show how to make hybrid bike of my avenger 220 with 2000w electr...
Hi friends today I am going to show how to make hybrid bike of my avenger 220 with 2000w electric bike conversion kit at home .
Here I used 72v 35A , Li-ion battery pack and 2000w hub motor. The torque and speed (60-65 km/h) of the motor are very good .The range of the bike per single charge is 55-70 km. according your bike weight ,load and speed .
You can get conversion Kit here --
https://gogoa1.com/products/gogoa1-17...
I bought Li-Ion batteries from ARB Accessories online.
You Can get Here ---
MAG Welding machine -- https://amzn.to/3ovkyTG
Angle grinder -- https://amzn.to/3I9UbJo
Here I used 72v 35A , Li-ion battery pack and 2000w hub motor. The torque and speed (60-65 km/h) of the motor are very good .The range of the bike per single charge is 55-70 km. according your bike weight ,load and speed .
You can get conversion Kit here --
https://gogoa1.com/products/gogoa1-17...
I bought Li-Ion batteries from ARB Accessories online.
You Can get Here ---
MAG Welding machine -- https://amzn.to/3ovkyTG
Angle grinder -- https://amzn.to/3I9UbJo
READ MORE
OPEN REEL
TECH DISCUSSION
No technical queries yet.